KLC developed a simple to use Digital Temperature Time Control device to be used with our heater product range for lab testing, room heating or end product temperature control. Most suitable to be used with our heating components like Ultra-thin Flexible Heater, Far Infrared Heaters and low ampere PTC Air Heater and PTC Heat Conductors . KLC's Digital Temperature Time Controller has the following features:
- Easy to use
- Automatically memorize previous setting
- Timer setting available from 30min intervals to continuous operation
- Precise temperature control within 1℃
- Can be utilized with KLC heater product ranges
- Both pre-wired device and connector (self-connect) device available
Digital Temperature Time Controller Series
| MODELS: | DTC-A1045A-150 | DTC-A1045B-150 | DTC-A2085A-150 | DTC-A2085B-150 |
| IMAGES: |
|
|
|
|
| TYPES: | AC110V Pre-wired |
AC110V Connector |
AC220V Pre-wired |
AC220V Connector |
Digital Temperature Time Controller - Basic Specifications
| Dimension | : 65 x 90 x 26mm |
| Material | : Aluminum outer casing |
| Input Voltage | : DC12V~24V/ AC100V~120V/ AC200V~240V |
| Frequency | : 60Hz (Please specify with our Sales Rep. if 50Hz is required) |
| Max. Current | : DC <10A; AC <4A |
| Sampling Rate | : 100ms |
| Ambient Temperature | : -20℃ to 55℃ (-4℉ to 131℉) with no condensation or icing |
| Ambient Humidity | : 0 to 80%RH; with no condensation or icing |
| Temperature Range | : 0 to 150℃ (32℉ to 302℉) |
| Setting/Indication Method | : Front panel digital setting; LED display |
| Temperature Control | : 1 to 150℃ (in units of 1℃) |
| Time Control | : 30min to continuous operation (in units of 30min or 1hr) |
| Uses NTC as temperature sensor (AC non-insulated); 80cm NTC wire length | |
